Sustainability of Current Agricultural Practices in The Cameron Highlands, Malaysia

Cameron Highlands is a mountainous region with steep slopes. Gradients exceeding 20^∘ are common. The climate is favourable to the cultivation of tea, sub-tropical vegetables and flowers (under rain-shelter). Crop production is sustained by high fertiliser and manure applications. However, agriculture in this environment is characterised by high levels of soil erosion and environmental pollution. A study on the sustainability of these agro-ecosystems was conducted. Results indicated that soil loss was in the range of 24–42 ton/ha/yr under vegetables and 1.3 ton under rain-shelter. Sediment load in the vegetable sub-catchment reached 3.5 g/L, 50 times higher than that associated with flowers under rain-shelter and tea. The sediments contained high nutrient loads of up to 470 kg N/ha/yr. The N, P and K lost in runoff from cabbage farms was 154 kg/season/ha, whereas in chrysanthemum farms it was 5 kg. In cabbage farms, the N, P, and K lost through leaching was 193 kg/season/ha. The NO₃–N concentration in the runoff from the cabbage farms reached 25 ppm but less than 10 ppm in runoff from rain-shelters. Inorganic pollution in the rivers was within the acceptable limit of 10 ppm. The sustainability of the agro-ecosystems is in the order of tea { > } rain–shelter ≫ vegetables.     

Risk assessment of heavy metal(loid)s via Spinacia oleracea ingestion after sewage water irrigation practices in Vehari District

Environmental Science and Pollution Research - The use of sewage water as an irrigation source can be beneficial in agricultural practices, however, it may result in human health risks due to the...     

The COVID-19 puzzle: a global nightmare

Environment, Development and Sustainability - In December 2019, WHO was informed with several unknown pneumonia cases and later it was found as highly contagious, transmittable and pathogenic viral...     

Mechanistic aspects of the thermal formation of halogenated organic compounds including polychlorinated dibenzo‐p‐dioxins part III†: Thermodegradation of organometallics and polymers

Thermodegradation of organometallics viz. RMX (where M = Mg, Ti, Pd, Sn, Si, Al; and X =halogen atom) provides corresponding haloorganics i.e. RX. 1,2‐Shifts of H and Cl on the carbene species like CH₂F. CF and CFCL₂, CF produced from R. CF. Si F₃ (R = CH₂F, CFCl₂) are preferred to that of fluorine. The thermolysis of R.CF₂. Si Cl₃ (R = CH₂F) produces chloroolefins via halogen exchange. Major products of thermal degradation of poly (vinyl chloride) (PVC) are HCl and benzene but the mechanism of PVC thermodegradation is still a matter of dispute. The thermal cracking of lignins yields substituted phenols.     

Composting of municipal solid waste by different methods improved the growth of vegetables and reduced the health risks of cadmium and lead

Environmental Science and Pollution Research - Reutilization of putrescible municipal solid wastes (MSW) in agriculture can provide valuable plant nutrients. However, it may pose serious...     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

基于LUCC的艾比湖区域生态风险评价及预测研究

以新疆内陆艾比湖流域典型区域为研究区,基于RS和GIS技术分析1998、2013年土地利用变化,尝试用CA-Markov模型预测2028年土地利用/覆盖变化.借助Fragstats3.4软件,基于土地利用/覆盖变化构建景观生态风险评价模型,分析1998~2028年景观生态风险的时空分异特征.结果表明：（1）1998~2013年,研究区土地类型面积变化明显.耕地面积增加量最大,增加的面积为152139hm²,而未利用地面积减少量最大,减少的面积为67605hm².2013~2028年,耕地和裸露的河床及盐渍地的面积增加明显,增加的面积分别为30730hm²,12427hm²,而未利用地和水体的面积分别从954376hm²和44889hm²,减至921079hm²和37157hm².（2）1998~2028年,研究区生态风险等级空间分布差异明显.高生态风险区面积变化较为显著,其面积分别约占总面积的36.6%,7.3%,23.7%.1998~2028年,全局Moran's Ⅰ值分别为0.436962,0.442202,0.506622,表现为一定程度的正相关.（3）1998~2028年,耕地分布在低,较低生态风险的比重上升,所占百分比分别为58.46%,78.58%,79.9%.林、草地类型的各生态风险等级的所占的比重的波动较大.     

Humic substances. Part II†: Photophysical,photochemical and free radical characteristics

The effects of mercury (HgCl₂) on cell population, chlorophyll a concentration and rates of photosynthesis and excretion were investigated in the phytoplanktonic species Dunaliella minuta in laboratory cultures. Mercury, above 25ppb inhibited both cell population and chlorophyll a concentration approximately to the same extent, whereas the photosynthetic rate was inhibited to a significantly lesser degree. Although, the total photosynthetic rate of the tested organism was reduced, above a threshold concentration, the photosynthetic activity was not reduced under these conditions, but it was in fact significantly greater than that in the control culture. This may suggest that in D. minuta the inhibitory effect of mercury is primarily on cell division rather than cellular photosynthesis, which is enhanced by the fact mercury caused a significant increase of the mean cell volume. Mercury, also, decreased the growth rate and final cell yield. The excretory rate was markedly increased at concentrations ≥ 250 ppb of mercury, but at lower concentrations it tended to depend more on the physiological state of cells than on mercury concentration. In the different cultures, the photosynthetic activity showed variations which occurred without major changes in the chlorophyll a content per cell, which remained almost constant and independent of variations in cell size and growth conditions.     

Mechanistic aspects of the thermal formation of halogenated organic compounds including polychlorinated dibenzo‐p‐dioxins. Part V†: Hypotheses and summary

The hypotheses on the de novo syntheses of polychlorinated dibenzofurans (PCDFs) and polychlorinated dibenzo‐p‐dioxins (PCDDs), based on known literature, are presented. Polychlorinated benzenes and polychlorinated phenols are probably key intermediates.

In the present article, hypotheses that may account for the presence of polychlorinated dibenzofurans (PCDFs) and dibenzo‐p‐dioxins (PCDDs) in the effluents from municipal and industrial incinerators are put forward. These hypotheses are based on the previously surveyed literature (Ref. 203–206) and experimental results on laboratory scale and thermodynamic calculations are considered. The interconnections of various reaction steps are speculative and no technological information was added to account for conditions in real incinerators. Conclusion of the discussions on the related subject matter, presented in the Parts I‐IV (Ref. 203–206), are also described in this paper.